Neoprene strap that retains the glasses on your face.

Stability

Sewn sleeves compatible with most glasses temples.

Compatibility

Strap designed for hikers seeking to retain their glasses.

Condition

Frequency

Adjustable Length

Style

Hook Type

Elastic

Here are some tips for finding the right size:
- Measure the width of the tip of the temple of your glasses. 
If it is between 5 and 7 mm wide, then you will need size S. 
If it is between 7 and 10 mm wide, then you will need size L.
- You can try out the retainer strap with your pair own of glasses in store.

Choice guide

Sun Protection

Set of three covers of different sizes with a central zipped compartment.

Multiple compartments

The wide opening and net top let you identify their contents.

Ease of use

Small cover: 60 g
Large cover: 80 g
Set of three: 200 g

Weight

Keep your belongings neatly sorted during your travels with this 3-packing cubes kit to ensure an effortlessly organised carry.

Volume (L)

Weight (g)

Number of Pockets

Type of Cover

Waterproof

Foldable

Number of Compartments

Fastener Type

Small cover: 30 x 20 x 9 cm
Large cover: 39 x 31 x 10 cm

Sizes and dimensions

Travel Accessories

Waterproof protection for 1 hour (5,000 mm) before washing; taped main seams.

Hydrophilic coating (RET=12): reduces condensation.

Breathability

Ventilated back for greater comfort when hiking.

Ventilation

Weighs 312 g (11 oz.) in size 10–11 years.

Lightweight

Pockets

This waterproof hiking jacket was designed to protect your kids from the wind and rain.

Drying in tumble dryer possible. Low temperature, maximum drum exhaust temperature 60°C.

Maximum wash temperature of 40°C. Normal cycle.

Ventilation Zippers

Weather Conditions

sleeve length

Sportsperson’s Height

Windproof

Pocket

type of waterproofing

breathability (in RET)

Type of Length

Removable Hood

Hood

Zipper Type

Schmerber

Main Material

The resistance of a fabric is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 1092 standard).The higher the water pressure, the more waterproof the fabric. A component with an impermeability of 5,000 mm will therefore withstand the pressure exerted by 5,000 mm of water (which corresponds roughly to a 1-hour downpour). Waterproofing is expressed in Schmerber units (for example: 5,000 Schmerbers). This number applies before washing.

Component waterproofing

A coating applied to the fabric makes it waterproof and windproof. Technically, a waterproof fabric is also windproof. Protection from the wind is critical, as wind can chill the body during physical activity.

Windproof effect

Component breathability is measured by its thermal evaporative resistance (RET). 
This allows perspiration to escape during physical activity, preventing it from accumulating on the skin. 
The lower the RET, the more breathable the fabric.      
RET ≤ 6: very breathable fabric 
RET ≤ 12: breathable fabric 
RET ≤ 20: little breathability
 
Our product has a 12 RET rating.

Component breathability

Created in our international design centre at the foot of the Mont Blanc in France, this product is then manufactured by our suppliers in Vietnam, Ethiopia, and Bangladesh.
These are partners that have genuine expertise in making our products and with whom we collaborate closely. 
Thanks to this relationship of trust with our industrial partners, we can create high-quality technical products.

Where do our jackets come from?

Kids' Hiking Jackets

Tested grip that meets our quality standards on smooth and damp surfaces.

Grip

Water drainage

These sandals are designed for swimmers to wear near swimming pools.

Skill Level

tightening zone

anti-slip

water drainage

Playing Surface

Foot Width

Support Area

Tightening Type

Material

Swimming Accessories

Wide zipper opening and handle to easily grasp each bag

Two different colour bags make identifying your belongings easy.

Fit perfectly inside 40 to 60 L backpacks

These specially-shaped bags were designed for storing and organizing belongings in your backpack.

Height (cm)

carrying system

Width

Length (cm)

Capacity

Polyester main envelope
Mesh window to see contents and let belongings breathe

Construction

Weight of one bag: 50 g
Weight of the set: 120 g

Dimensions

Waterproof coating (5,000 mm). Main seams taped.

Hydrophilic coating (RET = 12): limits condensation inside the garment.

Easy opening/closing

Ripstop fabric for greater resistance. 2-year warranty

Robustness

Designed for young adventurers, this waterproof jacket offers reliable protection against bad weather.

Maximum washing temperature 30°C. Normal cycle.

Customization

A fabric’s resistance is measured by the height of a water column in mm that can be supported by the fabric (test based on the ISO 1092 standard). The higher the water pressure, the more waterproof the fabric.This jacket can withstand 5,000 mm of water (equivalent to a rain shower lasting 1 hour).
To approve this, the MH 500 Waterproof Hiking Jacket was placed in a shower for one hour with a volume of 60 L of water/m²/h. This test reproduces average rain shower conditions in the mountains.


How is the water resistance of the MH 500 Waterproof Hiking Jacket measured?

Fabric breathability is measured by its thermal evaporative resistance (RET). 
This allows perspiration to escape during physical activity, preventing it from accumulating on the skin. 
The lower the RET, the more breathable the fabric. 

RET ≤ 6: very breathable fabric 
RET ≤ 12: breathable fabric 
RET ≤ 20: little or no breathability

How breathable is the MH 500 Waterproof Hiking Jacket?

Resistance to wear and abrasion test: for example, we test our fleeces in the lab to ensure they do not pill. Colourfastness test: we check colourfastness to ensure colours don’t bleed if they come into contact with saliva. Aging test: Verifies that repeated washing does not alter the fabric’s properties, performance, thickness, or appearance.

How is the resistance of the MH 500 Waterproof Hiking Jacket tested?

1/ Machine wash (30°C to 40°C): fasten hook-and-loop tabs and zippers. Use gentle detergent. Wash jackets and pants inside out. Loosen straps and elastics. 
2/ Avoid bunching the garment in the washing machine as this can damage it. 
3/ Do not mix garment types and colours. 
4/ Do not use bleach or fabric softener.
5/ Choose a long rinse and gentle spin cycle.
6/ Hang to dry or run it through the dryer (minimum temperature, minimum duration).

Care instructions

Quick-drying fabric that wicks away perspiration

Moisture management

Lightweight, comfortable build (weighs only 48 g/1.7 oz)

Adjustable rear strap for a secure, pressure-free fit

Hook-and-loop closure for head sizes from 56 to 62 cm (22.1″–24.4″)


Adjustable

A cap built to keep you cool and comfortable on warm-weather runs, whether you’re training or racing. 

To ensure optimal comfort during exercise, this cap features a quick-drying fabric that effectively wicks moisture away to keep you cool. 
Mesh side panels boost airflow for better ventilation.

Perspiration wicking / Lightweight design

The hook-and-loop tab at the back adjusts to fit head sizes from 56 to 62 cm (22.1″–24.4″).
Remember to measure your head size. The adjustment system is easy to use and ensures a comfortable fit for everyone.
You can tuck any extra strap into the opening at the end.

One-size hat

The V2 cap features a fully updated, modern design that blends technical performance with everyday versatility. Its 7 cm (2.8″) curved rigid visor gives just the right mix of sun protection, clear view, and style.

Sleek new lines for this V2 version

An inner mesh lining absorbs and wicks perspiration 
to boost comfort and stability.

Lightweight, breathable, and stylish, this cap is a must-have in any running kit.

Versatility and comfort

Your brain plays a key role in controlling body temperature. Direct sun on your head can make it harder for your body to cool down, increasing the risk of heatstroke. Wearing a cap helps keep you protected.

Why protect your head?

Although this cap protects you from the sun, take these precautions before a trail run:
- Check the weather forecast to make sure you bring the right gear.
- Cover body parts exposed to the sun.
- Wear sunglasses.
- Apply sunscreen regularly.
- Eat and drink at regular intervals.

How to protect yourself from the sun

Ideal for spring and autumn.
Recommended temperature: 8°C
Limit temperature: 3°C

Warmth

Stretch

Reinforced coating on the palm reduces abrasion.

Abrasion resistance

Tactile efficiency

Polyester knit for breathability and keeping your hands dry.

Pairing buckle lets you clip the gloves together. Ideal for storing them.

These gloves are designed for mid-season hikers to provide warmth and dexterity in cool weather.

abrasion 

Season

reinforced area

reflective

Reinforced Palm

Options

Air Temperature

leash

All our gloves are lab-tested on a thermal hand. The temperature ratings (recommended and limit) come from a study with a test panel of 23 walkers exposed to temperatures ranging from 5°C to -20°C and 10 km/h winds. These temperature ratings are only valid in walking conditions. The MT 500 Hiking Gloves have a warmth rating of 1 out of 5. Recommended temperature: 8°C | Limit temperature: 3°C

How is usage temperature measured?

Just like you wear several layers of clothing when hiking, you can wear liner gloves under your gloves that will act as a thermal base layer. This multi-layer system enables pockets of air to form around your hands, efficiently insulating them from the cold.Remember to wear large enough gloves so your fingers do not become constricted. Compression reduces blood circulation in the fingers.

How to effectively protect your hands from the cold

When active, the body generates heat that is preserved by your clothing’s thermal insulation. If clothing isn’t warm enough, your body cools down and circulation to your hands and feet drops to keep your core warm. Your clothing therefore plays a role in keeping your hands warm.

How to keep your hands warm with the right clothing

Dexterity refers to your ability to handle objects while wearing gloves. Our MT 500 Hiking Gloves have been rated in a laboratory. The closer the glove’s dexterity is to 5, the easier it is to handle objects while wearing gloves. For example, we tested the MT 500 Hiking Gloves for putting on and opening a jacket, handling objects in a bivouac, and eating and drinking. The MT 500 Hiking Gloves have a dexterity rating of 4 out of 5.

What is a glove’s dexterity?

The MT 500 Hiking Gloves are not windproof.
Did you know that the wind can make you feel colder? An outdoor temperature of 0°C with a wind speed of 20 km/h feels like -10°C. The windproof components reduce the wind chill resulting from the cooling effect of the wind.
For complete protection from the elements, pair them with our MT 500 Hiking Waterproof Over-Gloves.

Are these gloves windproof?

Avoid placing the gloves on a heat source to dry. This could damage the fabric and they could lose their shape.

Did your liner gloves get wet?

Cross-Country Ski Gloves

Brushed on both sides, with 200 g/m2 density that makes this fleece comfortable.

Polyester knit: Allows perspiration to escape (RET = 6.3).

Durable component specially chosen for young adventurers! Two-year warranty.

Durability

Weighs 110 g (4 oz.) in size 5–6 years, compresses to carry in a backpack.

Machine wash at 30°C. Quick drying. No ironing needed.

Easy maintenance

This fleece was designed to protect your kids during outdoor activities in cool weather.

Collar Type

Grammage

The brushed fleece component is designed to trap air.
This air acts as a natural insulator, keeping the body warm.

Fleece material: Insulates with air

We conduct lab tests to ensure the highest durability standards: tested for its resistance to friction that causes pilling, colourfastness, and aging to ensure that repeated washing does not alter the fabric’s properties, performance, thickness, or appearance.

Component durability

To assess the fabric’s breathability or the evaporative resistance, RET (test based on the ISO 11092 standard) is measured. The lower the fabric’s resistance, the more perspiration evaporates and the more breathable the fabric. For example: RET < 9 = extremely breathable fabric/9 < RET < 12 = very breathable fabric/12 < RET < 20 = breathable fabric/RET > 20 = little or no breathability

Our Quechua global design centre is based in Passy, at the foot of Mont Blanc in Haute-Savoie, France. 
This location is a real meeting place for our teams and outdoor sports enthusiasts. 
It’s the perfect spot for designing our mountain hiking products.

Product design: our outdoor experts

Created in our international design centre at the foot of the Mont Blanc in France, this product is then manufactured and assembled by our suppliers in China, Vietnam, and Bangladesh.
We collaborate closely with these partners who have specialist knowledge in fleece manufacturing. 
Thanks to this relationship of trust with our industrial partners, we can create high-quality technical products.

Where do our fleeces come from?

We guarantee that our suppliers comply with our code of conduct. These suppliers are often located in developing countries where our presence helps create jobs.
By conducting audits and having teams on site, we make sure that the working environment of the employees meets certain quality standards in terms of human respect and personal fulfilment.

Working conditions in our production workshops

Kids' hiking shirts

Swim with fog-free goggles – these swimming goggles have an anti-fog treatment.

Anti-fogging

Enjoy excellent support thanks to the adjustable nose bridge.

These swimming goggles offer a very good field of vision.

Field of vision

Lenses filter more than 99% of harmful UVA and UVB rays to protect eyes.

Sun protection

These goggles are designed for beginner swimmers wanting to get into or back into swimming.

Technical Lens

Type of Lens

interchangeable lenses

Nose Bridge Type

glass composition

fogging treatment

Lens Colours

corrective lense

With Case

The appearance of fogging depends on several factors, the difference in temperature between the body and the water, humidity levels, etc. 
Wear due to friction is one of the main causes.
If your goggles fog up, dip your lenses in the water and a protective film will reform.
It is normal for the performance of the anti-fog coating to drop over time.

We provide an anti-fog marker that reactivates an ageing anti-fog treatment and makes your goggles last longer.

Fogging

The seal of swimming goggles depends on the silicone skirt correctly fitting the shape of your face. 
Before purchase, we advise you to do the "suction" test without the strap. 
If the goggles stay on the face by themselves with a little suction, the product will be watertight during your swim. This also enables you to spot any areas of discomfort or annoyance when the model is on the face.
This model comes in size S (narrow faces) and size L

decathlon

Babies’ Category 4 Sunglasses, MH B100 Age 6–24 Months