Fast acting

Highly adjustable: fits a wide range of junior snowboarder boots.

Adjustable

Cushioning

Anatomic design

Conventional fastener: pump to achieve the required support. No limit.

Stability

Pair of bindings, 2 discs, 8 x 16 mm (0.63”) screws compatible with discs, 8 washers.

Capacity

For boards with normal inserts or Burton Channel (not Burton 3D-compatible).

Compatibility

Designed for young snowboarders, sizes 2 to 5, looking for a traditional binding with a quick and easy opening.

Condition

Skill Level

Attachment Type

Kids like to be able to get their bindings on and off without help, and their parents like it too. Two-buckle fasteners take longer to handle. A single buckle with an asymmetrical strap tightens more than enough, even for kids proficient at snowboarding at a mix of speeds with carved turns and jumps.

A word from the product manager

A single buckle tightens firmly at the ankle with an asymmetrical strap over the toes, needed for backside turns. There’s no easier choice for kids!

Single-buckle opening mechanism

The original settings suit a majority of users. But feel free to make adjustments:
- canting, spoiler, 
pre-drilled front ratchets. Adjust it forward (for sizes 4.5 to 6.5) or back (sizes 3 and 3.5). You will need to unscrew the binding.
- pre-drilled ratchet strap size.

Adjustment options

Can adapt to a kid’s body shape, but keep in mind that all snowboards have a recommended binding position (as marked on the binding inserts). A wider position lowers the rider’s stance on the board and improves stability. It also makes aerial rotations easier. On freestyle boards, the recommended stance width is generally wider than for all-mountain boards.

Stance, binding spacing

For piste/off-piste boards:
To keep feet closer together, move the binding forward only.
To move feet farther apart, move the binding backward. The idea is to get a little further back to improve piste performance on bends and float on powder snow. 
For freestyle boards (symmetrical): 
best to keep both bindings centred on the board.

How do I change the foot position on the board?

For freestyle riding, we recommend binding angles of +18° at the front and 0° at the back.
For on/off-piste use with all types of snow, we recommend +18° and -6°. The open back foot position helps keep the shoulders in line with the board.
In pure freestyle use, feel free to opt for fully symmetrical angles, e.g. +15° and -15°.
The choice of binding angle is very personal, so go ahead and test a few to find what suits your kid best.

How should I angle my snowboard bindings?

Disc bindings come with 4 screws, slide along a single axis, and generally have 5 settings. The setting is used to centre the boot on the snowboard and prevent the foot from extending too far over the edge of the board (so you won’t fall!). Make sure that your boot extends the same distance over both sides of the board. Rotate the disc 90° to increase or decrease the stance provided by the inserts. This means you won’t be able to centre the bindings laterally.

Remember to centre your boot on your snowboard!

The Burton snowboard brand has its own system for mounting bindings: the Channel. The binding is screwed onto 2 mobile inserts included with the board.
Our disc allows this binding to be mounted on the Channel.
However, the screws supplied with our discs are not compatible in diameter. The Burton insert is also different from the rest of the market. You’ll need to buy Burton screws.

Sports/

Winter Sports/

Snowboarding Gear/

Snowboard Bindings/

dreamscape

Kids’ Snowboard Bindings S - Faky Black/Red