Mount compatible with most sounder and float tube brands.

Compatibility

The mobile arm makes it easy to pick up sounder.

Ease of use

The clip-in base is for quickly setting up the echo sounder.

Easy assembly/dismantling

8601075 Drive pins (support locking system in the base)

Repair

This echo-sounder bracket was developed for fishing from a float tube or from an inflatable boat.

Thickness (mm)

Condition

Skill Level

Weight (g)

type of frequency

Width (mm)

Length (mm)

frequency (kHz)

navigation boutons

screen definition

Touchscreen

Colour Screen

Design with 2 sections:  
- The mount has a clip-in base with adjustable straps to suit the diametre of the float tube’s side tubes 
- The sonar mount is integrated into the sounder mount
which allows quick and easy set up of the echo sounder and sonar on the mount, with the clip-in base already installed on the float tube.
To secure the assembly, just insert the safety pin between the 2 sections.

General Introduction

- Sftr echo sounder bracket mount plate 16 cm x 5.4 cm (can be re-pierced if needed)
- Sonar mount plate: 5.5 cm x 6.5 cm (can be re-pierced if needed)
- Mount with clip-in base assembled on 2 adjustable straps measuring a maximum of 135 cm in length (strap width 2.5 cm)

Features

- A mount made up of the clip-in base with 2 adjustable straps to suit the diametre of the float tube’s side tubes or inflatable boat. (To be left on your vessel)
- A mount with a plate (can rotate 360°), for attaching the screen bracket and sonar mount onto the mobile arm.
The arm of the sonar mount is jointed and notched. This allows easy lifting when passing through busy areas or coming out of the water.

Composition

Mount can be easily positioned on the left or right side of vessel.
This mount is designed for echo sounders measuring 4 to 7 inches. It can be used to mount some 9-inch echo sounders, depending on the model.

Sports/

Outdoor/

Fishing/

Float Tubes/

caperlan

Fishing Echo-Sounder Bracket - FLTB SES